Product introduction:
QG-PCB30 manual automatic precision cutting machine adopts speed regulating motor, which drives the cutting blade to obtain effective speed through belt drive. The touch screen display and operation, the screen is clear, the function layout is reasonable, and the parameters can be set freely, making the cutting preparation more handy. According to different materials or personal usage habits, the machine can choose the right hand-operated runner to control the main shaft advancing method or the platform advancing method for cutting, and can also automatically cut according to the set parameters. The overall design of the fuselage is exquisite, with a built-in independent stainless steel circulating filter cooling water tank, which is mixed with 80% water and 20% cutting fluid to lubricate the cutting piece and the sample, which can effectively prevent the surface of the sample from heat and burn, and prevent the guide rail and ball screw from rusting. The machine is equipped with the safety protection function of opening the cover and shutting down. The working area adopts a fully enclosed structure and has a transparent protective cover for observation during cutting. The working platform can be equipped with different clamps, and the clamping device can be disassembled and cleaned freely. QG-PCB30 desktop cutting machine, compact but powerful, can be used for cutting metallographic samples such as PCB sheet, metal materials within Φ30mm, electronic parts, inlays, etc. Cost-effective, it is the best choice for cutting small pieces.
The main parameters:
| model | QG-PCB30 |
cutting method | Manual/Automatic, Spindle Feed or Platform Feed |
Feed speed | Manual control/automatic adjustment 1-36mm/min (The adjustment step is 0.1mm/min, and the maximum speed is zero load state) |
Cutting blade size | Φ180×0.8×Φ22mm |
Maximum cutting diameter | Φ30mm |
Maximum stroke | Spindle stroke 140mm, platform stroke 230mm |
Spindle speed | 500-3000r/min |
Motor Power | 1.2kW |
Cutting platform size | 245×415mm, 8mm T-slot |
cutting jig | Quick clamp, jaw height 45mm; vertical clamp, opening 27mm |
display and control | 5.7 inch touch screen display and control |
power input | Single phase 220V, 50Hz, 8A |
Pump flow | 16L/min |
Dimensions | 620×740×380mm |
net weight | 80kg |
The standard configuration:
| name | Specification | quantity |
host |
| 1 set |
cutting blade | Φ180×0.8×Φ22mm, Diamond Grinding Wheel | 1 (already installed on the host) |
cutting fluid | 3kg | 1 barrel |
dumb wrench | 22mm，14×17mm | 1 each |
Allen key | 4mm，5mm | 1 each |
custom wrench | for vertical clamps | 1 |
vertical fixture |
| 2 |
power cable |
| 1 |
manual |
| 1 |
certificate |
| 1 |
Operation interface:
It is recommended to select an external water tank for cutting PCB circuit boards or plastic parts:
Application cases of this machine on some special materials:
|
|
| |
