Product introduction:
QGZ-90 automatic metallographic sample cutting machine is a precision cutting machine integrating manual and automatic. The height of the spindle is adjustable, and the X-axis and Y-axis are automatically and precisely controlled, which can realize continuous slice cutting of samples. With automatic intelligent feeding, the speed can be automatically adjusted according to the hardness of the material to avoid stalling. It is suitable for cutting samples of various shapes, sizes and materials. After cutting, the surface of the sample is bright, flat and free of burns. It is an ideal equipment for cutting samples.
Features:
The whole machine is made of thick plate, which is firm and stable;
7-inch color high-definition touch screen, intuitive display, convenient operation;
Hand and automatic integration, flexible feeding method;
The Y-axis is automatically and intelligently fed, and the speed is automatically adjusted according to the hardness of the material to avoid stalling;
The X-axis moving platform can realize continuous cutting in the Y-axis direction;
The Z-axis can be adjusted manually, which is suitable for grinding wheel cutting discs of various sizes, and can compensate for the loss of cutting discs, effectively improving the utilization rate of cutting discs;
Explosion-proof transparent observation window, open cover and sudden stop protection, safe and reliable, equipped with powerful exhaust device to make observation clearer;
Adjustable LED lighting for effective lighting of the entire cutting room area;
Standard double-sided quick clamps and T-slot table, easy to operate, corrosion-resistant and easy to replace;
Three adjustable cooling water channels to prevent sample burn, independent cleaning water gun, easy to clean;
Mobile magnetic filter circulating water tank to avoid clogging and high utilization rate.
Scope of application:
It is suitable for all kinds of ferrous metals, non-ferrous metals, heat treatment parts, forging parts, semiconductors, crystals, ceramics and rocks and other samples.
The main parameters:
model | QGZ-90 |
cutting method | Manual/automatic, platform Y feed |
cutting mode | Continuous cutting, pulse cutting |
Feed rate | Manual control/automatic adjustment 1~240mm/min (maximum speed is zero load state) |
Cutting blade size | Φ300×2×Φ32mm |
Maximum cutting diameter | Φ90mm |
Y-axis travel | 260mm |
X-axis travel | 40mm |
Z-axis travel | 50mm, manual adjustment |
Spindle speed | 500~3000r/min |
Motor Power | 4kW |
Cutting platform size | 435×300mm, 12mm T-slot |
cutting jig | Quick clamp, jaw height 60mm |
display and control | 7-inch touch screen display and control |
input power | 380V, 50Hz, 12A, three-phase five-wire |
Dimensions | 910×935×1350mm |
Host weight | 430kg |
water tank capacity | 80L |
Pump flow | 50L/min |
Tank size | 610×550×680mm |
Net weight of water tank | 85kg |
The standard configuration:
name | Specification | quantity |
host |
| 1 set |
water tank |
| 1 set |
cutting blade | Φ300×2×Φ32mm, Resin Grinding Wheel | 2 tablets (1 piece is installed on the main unit) |
cutting fluid | 3kg | 1 barrel |
inflexible | 14×17mm,24×27mm | 1 each |
water inlet pipe | 1/2 金属管 | 1 |
outlet pipe | Φ48mm | 1 |
Exhaust pipe |
| 1 |
manual |
| 1 |
certificate |
| 1 |
Options/Consumables:
name | Specification |
Push-pull fixture |
|
vertical fixture |
|
Resin Grinding Wheel | (300×1.5×32)(300×2×32) |
Silicon carbide grinding wheel | (300×1.5×32)(300×2×32) |
White corundum grinding wheel | (300×1.5×32)(300×2×32) |
Chrome corundum, single crystal jade grinding wheel | (300×1.5×32) |
Diamond Grinding Wheel | (300×1.5×32) |
CBN grinding wheel | (300×1.5×32) |
cutting fluid | Z0703B synthetic heavy duty cutting fluid |