Product introduction:
In the process of metallographic sample preparation, the pre-grinding of the sample is an indispensable pre-polishing process, and the sample after rough grinding, fine grinding and fine grinding can be effectively polished. YM-2A metallographic sample pre-grinder is a classic product that can be operated by two people at the same time. It is equipped with a water supply system for wet grinding. It has the advantages of stable transmission, low noise, convenient operation and maintenance, etc. The diameter of the grinding disc is large, suitable for Pre-grinding requirements for a variety of materials.
The main parameters:
| model | YM-2A |
Disc diameter | 230mm |
Sandpaper diameter | 230mm |
Rotating speed | 400r/min, 500r/min (630r/min, 780r/min customized) |
Motor Power | 0.55kW |
input power | 380V, 50Hz, 5A, three-phase four-wire |
Dimensions | 740×700×320mm |
net weight | 55kg |
The standard configuration:
| name | Specification | quantity |
host |
| 1 set |
grinding disc | 230mm | 2 |
ferrule |
| 2 |
sandpaper | 230mm | 6 sheets |
water inlet pipe | Ф10mm | 1 |
outlet pipe | Ф32mm | 1 |
manual |
| 1 serving |
certificate |
| 1 serving |
