What is the principle of Shanghai metallographic microscope

The metallographic microscope is mainly composed of optical system, illumination system, mechanical system, and accessory installation (including photography or other installations such as microhardness). A metallographic microscope is a microscope that uses visible light as an illumination source. […]

What are the problems that often occur in Shanghai optical microscopes

1. When using the optical microscope, everyone should pay attention to whether the overall installation of the microscope is loose. For example, if the optical microscope is used for a long time, it will cause problems such as the loose support frame and the loose installation of the objective lens. […]

What is the difference between a metallographic microscope and an ordinary microscope?

Microscopy, microelectronics installation, higher inspection capabilities such as bonds or bond wires, nowadays are mostly about understanding the difference between ordinary microscopes and metallographic microscopes. The difference is that due to different samples, metal materials such as metallog […]

How should the microscope be installed

1. Take out the base, and place the base to the extent that it is taken out. 2. Loosen the screws on the column, then adjust the height to a suitable position, and then fix the screws. 3. Take out the lens assembly. Remove the packaging cover from the objective lens. 4. Next, attach the smoke-proof […]

What are the requirements of Shanghai optical microscope

(1) Appropriate thickness. This thickness enables high resolution in better optics and is compatible with the system’s depth of field. (2) Transparent enough. (3) Sufficient contrast can be formed on the basis of absorption difference. Almost all biological materials can be obtained by paraffi […]

What are the common problems of Shanghai optical microscope

1. When using an optical microscope, everyone should pay attention to whether the overall installation of the microscope is loose. For example, if the optical microscope is used for a long time, it will cause problems such as loosening of the bracket and loose installation of the objective lens. If […]

How to adjust the light microscope

When using transmissive excitation, blue light can be used to adjust the illumination system according to common brightfield illumination methods, including adjusting the light source and adjusting the center of the condenser. If you use a darkfield condenser, you also need to pay attention to the u […]

Main uses and features of computer-based binocular inverted metallographic microscope 4xbc

Shangguang No.5 Factory invites you to participate in the Shanghai Optical Fair