1.Product Overview
LSQ-80 metallographic sample cutting machine is composed of fuselage, electric control box, cutting room, motor cooling system, cutting wheel pieces and other components. The machine cools the sample through the cooling system to prevent the sample from overheating and burning the tissue in the cutting process. This machine can be applied to the cutting of general metallographic and lithographic materials. In order to ensure that the ideal sample can be cut in a safe state, the machine adopts a completely closed double cover shell structure. And for the safety period is also equipped with an independent door safety switch, large volume of cutting, more convenient to cut the use, is the ideal choice of colleges and universities, factories and enterprises metallographic test equipment.
2．the main technical parameters
| Maximum cutting diameter | 80mm |
| Platform Y move towards | 275mm |
| Table size | 320*300mm |
| Gripper table specifications | The clamping table is divided into left and right, and the central cutting edge |
| Cutting method | Manual |
| Gifting method | Manual |
| Feed distance | Manually set as needed |
| Cooling system | Automatic water cooling |
| Tank capacity | 80L |
| Spindle speed | 2800r/min |
| Motor power | 3KW |
| Overall dimensions | 950*1000*1300mm |
| Power supply | Three-phase four-wire 380V50Hz |
| Weight | About 160kg |
3. Configuration list
| Product accessories | Units | Quantity | Remarks |
| Tank | a | 1 | |
| Water pump | Taiwan | 1 | |
| Rust-proof lubricant | barrel | 1 | 2.5 L |
| Sand wheel pieces | slice | 2 | 350 * 2.5 * 32 mm |
| Pipe clamp | a | 2 | 2 of each 13mm-19mm |
| Pipe clamps | a | 1 | 32mm
1 each |
| Wrench | the | 1 | 12-14mm |
| wrench | the | 1 | 24-27mm |
| Wrench | the | 1 | 36mm |
| Water inlet pipe | The root | 1 | |
| Drain pipe | The root | 1 | |
| Technical documents | 1 copy of product specification 1 copy of product certificate | ||
