1.Product Introduction
In the process of metallographic sample preparation, sample grinding is an essential process. The grinding of the sample is generally divided into rough grinding and fine grinding two processes. The purpose of rough grinding is to obtain a flat surface, which is generally completed on the grinder, and there are still deep marks on the specimen surface. The purpose of fine grinding is to eliminate these wear marks, in order to obtain a flat and smooth grinding surface, and prepare for the next step of polishing. M-1 metallographic sample pre-grinding machine can be used for metallographic sample fine grinding, the shell adopts the whole blister, novel appearance, with smooth rotation, low noise, easy operation, high work efficiency, and has its own cooling device, you can cool the sample during grinding, in order to prevent the sample overheating and damage the metallographic structure. It is suitable for metallographic laboratory of factories, colleges and universities and scientific research institutions.
2.Technical parameters
| Disk diameter | φ203mm (customizable φ230mm, φ250mm) | Input power | 370W |
| Mill speed | 450r/min | Overall dimensions | 730 * 420 * 320 |
| Input voltage | Single-phase 220V 50Hz | Heavy weight | 31Kg |
3.Parts list
| Model number | Product name | Units | Quantity | |
| M-1 | Metallographic sample pre-grinder | Taiwan | 1 | |
| Product Accessories | Units | Quantity | Remarks | |
| Millstone | a | 1 | It has been installed on the device | |
| Water retainer | a | 1 | Already installed on the device | |
| Pressing ring | a | 1 | Already installed on the device | |
| Water sandpaper | zhang | 2 | Φ 203 mm | |
| Water inlet pipe | The root | 1 | Φ 12 | |
| Outlet pipe | The root | 1 | Φ 32 | |
