Product introduction:
In the process of metallographic sample preparation, the polishing of the sample is a main process. After the polished sample is polished on a polishing machine, a bright mirror-like surface can be obtained. PG-1A metallographic sample polishing machine is a classic product, equipped with a water supply system for polishing. It has the advantages of stable transmission, low noise, convenient operation and maintenance, etc. The diameter of the throwing disc is large, which is suitable for polishing requirements of various materials.
The main parameters:
model | PG-1A |
Disk diameter | 230mm |
throwing diameter | 230mm |
Rotating speed | 900r/min (1400r/min customized) |
Motor Power | 0.2kW |
input power | 380V, 50Hz, 4A, three-phase four-wire |
Dimensions | 340×460×350mm |
net weight | 22kg |
The standard configuration:
name | Specification | quantity |
host |
| 1 set |
sell | 230mm | 1 (installed) |
ferrule |
| 1 |
Adhesive polishing cloth | 230mm | 1 piece |
water inlet pipe | Ф10mm | 1 |
outlet pipe | Ф32mm | 1 |
manual |
| 1 serving |
certificate |
| 1 serving |