Product introduction:
In the process of metallographic sample preparation, the polishing of the sample is a main process. After the polished sample is polished on a polishing machine, a bright mirror-like surface can be obtained. PG-2B metallographic sample polishing machine is a classic product, which can be operated by two people at the same time. It is equipped with a water supply system for polishing. It has the advantages of stable transmission, low noise, convenient operation and maintenance, etc. Polishing requirements for the material.
The main parameters:
model | PG-2B |
Disk diameter | 230mm |
throwing diameter | 230mm |
Rotating speed | 650r/min,800r/min |
Motor Power | 0.55kW |
input power | 380V, 50Hz, 6A, three-phase four-wire |
Dimensions | 740×700×320mm |
net weight | 55kg |
The standard configuration:
name | Specification | quantity |
host |
| 1 set |
sell | 230mm | 2 |
ferrule |
| 2 |
Adhesive polishing cloth | 230mm | 2 sheets |
water inlet pipe | Ф10mm | 1 |
outlet pipe | Ф32mm | 1 |
manual |
| 1 serving |
certificate |
| 1 serving |