Product introduction:
In the process of metallographic sample preparation, the cutting of sample material is the first important process of sample preparation. QG-1 metallographic sample cutting machine adopts high-speed rotating resin grinding wheel to cut the sample. In order not to burn the tissue of the sample during cutting, the machine is equipped with a cooling device, which can be cooled by an external water source. This machine is widely used in various metallographic laboratories to cut various metallographic samples, and is extremely convenient to operate and maintain.
Main parameters:
model | QG-1 |
cutting method | Manual, Y-direction feed |
Cutting blade size | Φ300×2×Φ32mm |
Maximum cutting section | 50×50mm |
Spindle speed | 2800r/min |
Motor Power | 2.2kW |
cutting jig | Threaded clamp or quick clamp, jaw height 50mm |
input power | 380V, 50Hz, 8A, three-phase four-wire |
Dimensions | 740×465×390mm |
weight | 70kg |
The standard configuration:
name | Specification | quantity |
host |
| 1 set |
cutting blade | Φ300×2×Φ32mm, Resin Grinding Wheel | 2 tablets (1 piece is installed on the main unit) |
dumb wrench | 46mm | 2 |
Allen key | 8mm | 1 |
water inlet pipe | Φ10mm | 1 |
outlet pipe | Φ32mm | 1 |
manual |
| 1 |
certificate |
| 1 |