1.Product Overview

Q-120B cutting machine Metallographic cutting machine is suitable for cutting all kinds of metal, non-metal material samples, in order to observe the material metallographic, lithographic structure. This machine is a manual/automatic cutting machine, can be arbitrarily converted into manual or automatic cutting mode, in the automatic state, can achieve unmanned operation. Large workbench and long cutting distance make cutting large sample become reality. It has the function of moving up and down, which compensates the loss of grinding wheel. With cooling device, the use of the configured coolant can take away the heat generated during cutting, to avoid the sample overheating and burn the sample tissue. The machine is easy to use, safe and reliable. It is the ideal choice of metallographic test equipment for colleges and universities and factories.

2.the main technical parameters

1. There are two kinds of intermittent cutting and continuous cutting

2. Spindle speed: 600-2300 RPM

3. Specification of grinding wheel: 400×3×32mm

4. Maximum cutting diameter: 120mm

5. Table size: 320mmX430mm

6. Motor: 4KW

7. Automatic feed speed range: 0-180mm/min

8. Up and down moving range: 0-50mm

9. Moving range: 0-340mm

10. Equipped with quick clamp

11. Power supply: three-phase four-wire (380V, 50HZ)

12. Dimensions: 960mmX950mmX1280mm(L X W X H)

3. Configuration list

1. A set of environmental dust removal device

2. A pair of quick clamps

3. 3 liters of environmentally friendly cutting fluid

4. Two cutting pieces

5. Two wrenches

6. One saw blade inner ring

7. One inlet pipe and one drain pipe